How to install and activate an eSIM
Install the eSIM while you still have Wi-Fi, before departure, then switch it on when you land. The steps below follow Apple's and Google's published instructions; menu names vary slightly by phone and software version.
Published , updated . Written and reviewed by Mark Smith, the site operator, from the sources listed at the end; no product was tested for this guide.
Before you buy
- Check that your phone supports eSIM and is unlocked: the manufacturers' lists and an EID entry in your phone's About screen confirm eSIM support; whether the phone is locked to a carrier is a separate question, so ask your carrier if you are not sure.
- Check the destination page for restrictions: some countries block provider sites in-country, so the eSIM must be bought and installed before you leave.
- Decide what the eSIM is for: data only, with your home SIM kept for calls and texts, is the usual setup.
iPhone
- Open Settings → Cellular (Mobile Data in some regions) → Add eSIM (Add Cellular Plan on older versions).
- Choose the method the provider gave you: scan the QR code with the camera, enter the activation details manually, or follow the provider's app, which can install the eSIM directly (Apple documents all three routes).
- Label the new line, for example "Travel", so you can tell it from your home line.
- Under Cellular Data, choose the travel eSIM as the line used for data; keep your home line as the default for calls and texts.
- Open the travel line's settings and turn Data Roaming on. Open your home line's settings and turn Data Roaming off if you do not want roaming charges on it.
Android (Pixel; Samsung and others are similar)
- Open Settings → Network & internet → SIMs → Add SIM → Set up an eSIM, as Google's instructions describe. On Samsung phones the path is Settings → Connections → SIM manager → Add eSIM.
- Scan the QR code or enter the activation code from the provider; some providers install through their app.
- When asked for SIM preferences, set the travel eSIM for mobile data and keep your home SIM for calls and texts.
- In the travel eSIM's settings, turn Roaming on; in the home SIM's settings, turn Roaming off.
On arrival
- Turn the travel eSIM on if you had switched it off, and give it a minute to register on a local network. Most plans start their validity at this first connection; the plan conditions on the destination pages say which.
- If there is no signal, open the line's network selection and pick one of the networks the plan lists (the destination pages show them), or toggle airplane mode once.
- Check that data goes through the travel line: your home carrier should not send a "welcome abroad" charge for data.
After the trip
You can delete the eSIM in the same settings screen or keep it for top-ups if the provider allows them (the tables mark plans that state top-up availability). Deleting a profile is permanent; the provider must issue a new one if you want it back.